LAUNCH CRT5011E TPMS Activation and Diagnostic Tool 
 

Launch CRT5011E TPMS code reader & diagnostic tool is specially developed by LAUNCH, which enables users to trigger TPMS sensor, program TPMS sensor, perform the relearning procedure and check sensor part number. Additionally, it also supports all 10 modes as OBD2 scanner for a complete diagnosis.

Highlights

【Full TPMS Function + OBDII Diagnostics 2 in 1】LAUNCH CRT5011E 2024 NEWEST TPMS tool integrated with tire pressure sensor Diagnose(Check),Activate(Read), Program, and Relearn. It activates and reads tire sensor information by receiving 315/433MHz signal, and resets the TPMS module through the OBD interface. CRT5011E also is an OBD2 scanner, which supports Read/Clear Codes, I/M Readiness, Data Stream, View Freeze Frame, O2 Sensor Test, On-Board Monitor Test, EVAP System Test, Vehicle Info, etc.

【Activate 99% TPMS Sensors】LAUNCH CRT5011E TPMS Relearn Tool can easily activate most of the known OEM TPMS sensors. The main application scenarios of CRT5011E are tire pressure sensor replacement, tire replacement, car assembly and detection of whether the sensor is normal.Whether you are an automotive DIY enthusiast or mechanic, you can easily activate any brand of sensor with this TPMS reset tool.This TPMS Reset tool can also help you clear dreaded warning light of TPMS&Engine(emission-related).

【5 Programming Modes & 315/433MHz】 LAUNCH CRT5011E tpms programming tool support easy and fast Auto Creat,Manual Creation, Copy ID by OBD, Copy ID by Activate, and Creat Multi-Sensor ( up to 8 ) to program the tpms sensor data into new sensors. (Note: It only available for LAUNCH LTR-01/LTR-03 Sensor and other Unencrypted sensor, highly recommend program LAUNCH LTR01 Sensor,search “B09CKDYKY7” to purchase) Professional Launch CRT5011E can program the sensor by receiving multi-frequency 315MHz/433MHz.

【TPMS Relearn & Read TPMS ECU ID & Wide Coverage】LAUNCH CRT5011E is a tire pressure monitoring system relearn tool, which supports 3 relearn ways: 0BD Relearn, Automatic Relearn and Stationary Relearn. After sensor programming is completed, the Relearn function needs to be executed to register the sensor ID in the ECU. Besides writing the Sensor ID into ECU, it can read sensor ECU ID from TPMS. It is worth mentioning that CRT5011E also supports the diagnosis of 99% of the models on the market.

【Fast & Accurate & Free Lifetime Upgraded】LAUNCH CRT5011E is a powerful and versatile tpms & obdii 2-in-1 tool. It is ideal for repair shops or tire shops to easily and accurately find and diagnose the faulty tire pressure sensor. You can update your CRT5011E from your PC at any time without any cost. Remember to check monthly for the software updates. launch may release several new features in the future to make your car obd2 and tpms diagnostics easier.


315MHz/433MHz Multifunctional TPMS Tool & OBD2 Scanner: LAUNCH CRT5011E TPMS tool is an integrated professional tire pressure diagnostic tool that can be used to activate, read, learn and program TPMS sensors. Also, it provides OBD2 diagnostics, including reading/clearing Codes, I/M  Readiness...
 

Languages

English, French, German, Spanish, Portuguese, Dutch, Polish, Swedish, Korean, Japanese, Russian, Italian

Launch CRT5011E User Manual

Launch CRT5011E TPMS Tool Functions:
 

Professional TPMS diagnosis and programming

The easy-to-use TPMS tool LAUNCH CRT5011E provides users with an experience of unparalleled efficiency and accuracy. Check sensor data, sensor ID, tire pressure/temperature, battery condition, sensor location and diagnostic TPMS to read/write sensor ID, read/clear TPMS code (turn off TPMS warning light), retrieve TPMS ECU information, and learn again, This TPMS tool allows users to program sensor data to LAUNCH sensors to replace tire pressure sensors that are not working properly and have low battery life.

1. TPMS:

Activate and match with all 315 MHz / 433 MHz tire pressure sensors
Reset, relearn and reprogram tire pressure sensors fast
Diagnose the tire pressure issues and turn off the warning light by relearning and programming your new tire pressure sensor.
Reprogramming LAUNCH LTR01 sensors AND other Unencrypted sensors with unlimited times
Read tire pressure, tire temperature and battery status accurately
Reprogram up to 8 sensors at one time
Provide TPMS relearning procedures and sensor OE number lookup
Multiple ID generation methods: Automatic creation/Manual creation/Copy ID by Activation/Copy by OBD/Creat Multi-sensor (1-8)

2. Full OBD diagnosis:

Read dynamic data streams and MIL/Read readiness status/Freeze frame data/Read DTCs/Clear DTCs/O2 sensor test/On-board monitor test/Read vehicle information, etc.
Please connect OBD2 port and start the engine before use.

Note: For indirect TPMS vehicle, only the Relearning function is supported.For vehicle using Direct TPMS, it generally includes: Activation, Programming and Relearning. The available TPMS functions may vary for different vehicles being serviced.

5 Modes to Program Launch LTR01 Sensors and Other Unencrypted Sensors
 

The Launch CRT5011E TPMS sensor programmer tool can program all Launch LTR01 sensors and Other Unencrypted Sensors, including 315MHz and 433MHz, to replace damaged sensors.

CRT5011E has 5 modes to program Launch LTR-01 or LTR-03 Sensors and Other Unencrypted Sensors:

Program Multi-Sensor: This allows users to program multiple sensors simultaneously. Up to 8 sensors can be programmed at the same time.

1. Auto Create: program the LAUNCH-sensor by applying random IDs created according to the test vehicle.

Step1: Select the wheel which needs to be programmed on the tool.

Step2: Place a LAUNCH-sensor close to the TPMS antenna of the tool.

Step3: Select CREATE SENSOR to create a new random sensor ID.

2. Manual input: Manually enter sensor ID. Users can enter the random ID or the original sensor ID if it is available.

Step1: Use the on-screen virtual keypad to input a random or original (if available) sensor ID.

Step2: Select the wheel which needs to be programmed on the tool, places a LAUNCH-sensor close to the TPMS antenna of the tool.

Step3: Start writing the new sensor ID to the LAUNCH sensor.

3. Copy ID by Activation: Write in the retrieved original sensor data to the LAUNCH-sensor. It is used after the original sensor is triggered.

Step1: Select the specific wheel position and press the button to trigger the original sensor.

Step2: Select the specific wheel position and press the OK button to create a sensor ID.

Step3: Start writing the new sensor ID to the LAUNCH sensor.

4. Copy by OBD :Use this LAUNCH TPMS service tool TSGUN to pull the old sensor ID stored in ECU, and write it directly into your LAUNCH RF-sensor.

5. Creat Multi-sensor 1-8: This function allows users to program multiple sensors simultaneously. Up to 8 sensors can be programmed at the same time.

Launch CRT5011E TPMS Tool can Activate 315/433 MHz Sensors

TPMS Sensor Activate: Launch CRT5011E TPMS Diagnostic Tool allows users to activate TPMS sensor to view sensor data such as sensor ID, tire pressure, tire frequency, tire temperature, battery condition(voltage).

TPMS Relearn:

• Stationary Relearn: Require the vehicle to be placed in the “Learn Mode”, follow the screen instruction to activate sensors, and perform stationary relearn.
• OBDII Relearn: Allow the CRT5011E to directly write TPMS sensor IDs to the TPMS module via the OBD connector.
• Auto Relearn: You can complete relearning by driving and refer to the on-screen Relearn Procedure for the exact details of the process.
• Due to different car models, OBDII Relearn, Stationary Relearn, and Auto Relearn may not exist at the same time. Some models have all 3 relearn methods, but some models may only have one or two relearn methods.

Relearning Procedure
Step1: Set the tire pressure according to the placard
Step2: Drive the vehicle for at least 10 minutes at least 15MPH
Step3: Sensors will be automatically registered
Note: This TPMS relearn tool supports three relearn methods (Automatic Relearn, Stationary Relearn, OBD Relearn), and the above is the automatic relearn procedure. If you have any other questions or concerns about the process, please check the manual.

!!! Attention

1. LAUNCH CRT5011E TPMS Relearn Tool is specially designed to diagnose electronic control systems of 12V vehicles. Please note that it is NOT suitable for a six-wheeled dual-rear car.

2. For early magnet-activated sensors, place the magnet over the stem and then place the tool alongside the valve stem.

3. If the TPMS sensor requires tire deflation (of the order of 10PSI), then deflate the tire and place the tool alongside the stem while pressing the button.

!!! If you want to activate/check/read the tire pressure sensor, please point the CRT5011E TPMS Tool within 30cm of the sensor.

!!! To activate/check/read the tire pressure sensor, please ensure that you have selected the correct car model, year and frequency of tpms sensor.

!!! If you cannot activate/check/read the tire pressure sensor, please try other car years and frequencies.

!!! If you still can't activate/check/read the tire pressure sensor, please try deflating the tires while activating it(Some models require).

!!! If it still fails to activate/check/read the sensor, PLEASE FEEDBACK Your Car Model, Year and Sensor OEM Part Number to Us.

Lifetime Free Upgrade + More Vehicle Coverage: LAUNCH CRT5011E TPMS tool can be upgraded for free from the PC side. At the same time, it covers 99% of the cars on the market, which is very suitable for auto repair shops or tire repair shops.


Full OBDII 10 Modes

This option presents a quick way to check for DTCs, isolate the cause of the illuminated Malfunction Indicator Lamp (MIL), check monitor status prior to emissions certification testing, verify repairs, and perform a number of other services that are emission-related.

Main Function:

1.Read/Clear DTCs, 2.I/M Readiness Check, 3.Freeze Frame Data Viewing, 4.O2 Sensor Test, 5.On-board Monitor Test, 6.EVAP System Test, 7.Live Data Stream Viewing, 8.Vehicle Information, 9.Componet test.

4 in 1 Live Data Stream

This option retrieves and displays live data and parameters from the vehicle’s ECU.

You can view up to four different kinds of data at the same time.

TPMS Service
This function includes two modules: Relearn Procedure and Part Number Lookup.
Relearn Procedure: Relearn operation applies only when the newly programmed sensor IDs are different from the original sensor IDs stored in the vehicle’s ECU. Relearn is used to write the newly programmed sensor IDs into the vehicle’s ECU for sensor recognition.
Part number lookup: It allows you to check the OE number of the sensors.

Key Fob Test
Please note that this feature is only available when you have upgraded your TPMS tool to the latest version.
If you are tired of going to the dealer to test the signal strength of your key fob, key fob testing will be easy and convenient with the CRT5011E tpms relearn tool. When your key fob starts to run abnormally or stops working, this TPMS tool can check your key fob to make sure it is in the best condition.

Check Sensor
Please note that this feature is only available when you have upgraded your TPMS tool to the latest version.
You can use this option to get the Tire Sensor ID, Tire Pressure/Temperature, Voltage, Versione Boot,Programming File, Serial Number(SN).

Launch CRT5011E TPMS Tool Vehicle List

For ABARTH,for ACURA ,for ALFA ROMEO, for ASTON-MARTIN ,for AUDI , for ALPINA , for BAIC, for BAOJUN, for BENTLEY,for BMW, for BORGWARD, for BUGATTI,for BUICK, for BYD, for CADILLAC, for CHANGAN, for CHERY, for CHEVROLET, for CHRYSLER, for CITROEN, for CMC, for DACIA, for DAEWOO, for DFM, for DODGE, for FAW, for FERRARI, for GEELY, for GMC, for GREAT WALL, for HAVAL, for HAIMA, for HOLDEN, for HONDA, for HSV, for HUMMER, for HYUNDAI, for INFINITI, for ISUZU, for JAC, for JAGUAR, for JEEP, for KIA, for LADA , for LAM BORGH-INI, for LANCIA, for LANDROVER, for LEXUS, for LIFAN, for LINCOLN, for LOTUS, for LUXGEN, for MAHINDRA, for MAN, for MASERATI, for MAYBACH, for MAXUS, for MAZDA, for MCLAREN, for MERCEDES, for MG, for MINI, for MITSUBISHI, for NISSAN , for OPEL , for PAGANI, for PEUGEOT, For PORSCHE, for QOROS, for RENAULT,for ROLLSROYCE, for SAAB, for SCION, for SEAT, for SKODA, for SMART, for SSANGYONG, for SUBARU, for SUZUKI, for SGMW, for TESLA, for SMART , for SSANGYONG, for SUBARU, TOYOTA, for TRAUM, for VAUXHALL, for VOLKSWA-GEN , for VOLVO, for ZOTYE,for FIAT, for FORD, for FOTON, for CHRYSLER, for GMC, for DFM, for CADILLAC, for CHERY, for CHEVROLET , for DODGE,for FAW, for FERRARI, for JAC ,for JAGURE

Specification:

Screen: 3.5” LCD display with a resolution of 320*480 pixels
Input voltage: 9~18V via OBD diagnostic port / 5V via USB cable
Operating temperature: 32°F~122°F / 0°C~50°C
Storage temperature: -4°F~158°F / -20°C ~70°C @ RH60%
Battery: 3100mAh
Memory: 16GB
Size: 200*115*35 mm
Weight: <450g

Packing List

1 * LAUNCH CRT5011E Scanner
1 * Nylon Bag
1 * USB Cable
1 *Card Reader
1 *OBD2 Cable
1 * US Charging Head
1 * EU Charging Head
1 * UK Charging Head